Furuno FS-2575, Руководство оператора

Страница: 120 / 165

10. NBDP TRANSMITTING, RECEIVING
10-8
10.6 Timer Operation
A built-in timer permits automatic transmission and reception of telex messages.
10.6.1 Enabling timer operation
1. Press the function key F3 to open the Operate menu.
2. Press the 7 key to open the Timer Operation List.
3. Press the ↑ or ↓ key to select the operation (name) you want to execute.
4. Press the Enter key. An asterisk appears beside the operation selected and “T. Op”
appears in reverse video on the communication status screen. If a file stored on a floppy
disk is to be sent, be sure the floppy disk containing the file is inserted in the drive.
*1
2
3
OP4
OP5
Timer Operation List
Timer Operation List
5. Select another operation (name) if desired.
6. Press the
Esc key.
When the predetermined time comes, the NBDP Terminal Unit automatically sends or
receives the message. The results of timer operation are displayed as either OK or NG (No
Good) on the Timer Operation List.
*1
2
*3
*OP4
*OP5
OK
OK
OK
NG
Timer Operation List
Timer Operation List
10.6.2 Stopping timer operation
1. Press the function key F3 .
2. Press the 7 key.
3. Press the ↑ or ↓ key to select the operation (name) which has an asterisk attached to it
and then press the Enter key. Remove all asterisks to cancel all timer programs.