Furuno FS-2575, Руководство оператора

Страница: 48 / 165

5. ROUTINE MESSAGE CALLING, RECEVING
5-2
2. Rotate the ENTER knob to select MSG TYPE and then press the ENTER knob.
3. Rotate the ENTER knob to select INDIVIDUAL MSG and then press the ENTER knob.
4. Rotate the ENTER knob to select TO and then press the ENTER knob.
5. Rotate the ENTER knob to select DIRECT INPUT or ADDRESS BOOK DATA and then
press the ENTER knob.
6. For ADDRESS BOOK DATA, select an ID from the ADDRESS BOOK (see section 6.14).
7. For DIRECT INPUT, enter the ID of the station where to send the call and then press the
ENTER knob.
8. Rotate the ENTER knob to select PRIORITY and then press the ENTER knob.
9. Rotate the ENTER knob to select ROUTINE, SAFETY or URGENCY and then press the
ENTER knob.
10. Rotate the ENTER knob to select COMM MODE and then press the ENTER knob.
Only for ROUTINE priority
11. Rotate the ENTER knob to select communication mode and then press the ENTER
knob.
12. Rotate the ENTER knob to select COMM FREQ and then press the ENTER knob. For
urgency and safety priority, go to step 14.
To a coast station To a ship station
13. Rotate the ENTER knob to select communication frequency setting method desired and
then press the ENTER knob. For CHANNEL and FREQUENCY, see the following “How
to set working channel, frequency”. POSITION and NO INFO let the receiving station set
the working frequency. Select POSITION or NO INFO to send the call to a coast station;
CHANNEL or FREQUENCY to send the call to a ship station.
How to set working channel, frequency
To send a call, set the working frequency as below, to communicate with the receiving
station. The working frequency can be entered by TX and RX frequencies or channel
number.