Furuno FS-2575, Руководство оператора

Страница: 106 / 165

9. NBDP FILE OPERATIONS
9-2
Note: Do not use lower case letters, or the symbols #, &, *, $ and % in telex messages.
Also, do not put “$$$” in the middle of a TX message, but at the end. The
communication line is automatically disconnected when this string is detected.
9.3 Saving a File
Use only 2HD type floppy disks. Insert floppy disk with care. Rough handling can destroy
the information stored inside. To eject a disk, press the
Eject button on the left side of the
floppy disk drive and then remove the disk. Do not eject a disk while the operating lamp is
lit; the contents of the disk can become damaged.
Hole opened: Write protect
Write-protect Tab
Write-Protect Tab
9.3.1 Formatting floppy disks
Before you save a file to a floppy disk, the disk must be formatted. Formatting prepares the
disk for use in the system.
1. Press the function key
F1 .
2. Insert a new floppy disk in the floppy disk drive.
3. Press the
0 key to select Floppy Disk Format.
4. Press the ↑ key to select Yes and then press the Enter key. The screen shows
formatting progress as below. After formatting has been completed, control is returned to
the standby screen.
Floppy Disk Format
9%
9.3.2 Saving a file
1. Press the function key F1 to open the File menu.
2. Press the 3 key. The Close Text window appears.
Save file ?
( UNTITLED1 )
Close Text
Yes
No
Close Text window
3. Yes is selected; press the Enter key.
4. Enter the file name, using up to eight characters.
You can use any alphabet or numeric on the keyboard. But you can not use the symbols
shown below. You can add an extension at the end of the file name, for example, .TXT, to