Furukawa electric S124, Руководство пользователя

Страница: 9 / 109

8
CAUTION
Do not connect or disconnect cords with wet hands. Doing so may
cause fire or electric shock.
Do not pull the cord to disconnect. Doing so may damage the cords
which may cause fire or electric shock. Hold the plug section and
disconnect the cord.
Do not put heavy items on the cords. Doing so may damage the
cords and result in fire or electric shock.
Do not modify or tamper with the cords. Excessive twisting,
bending or stretch the cords may cause fire or electric shock.
Ensure that the cords are disconnected and the batteries are
removed from the machine’s main body when storing the fusion
splicer.
Non oil-based solvents should be used to clean the optical lenses.
Store the fusion splicer in a cool dry place.
When the temperature of the splicer body is vastly different from
the operating temperature (even if the environment temperature is
within the operating temperature limit), please use only after the
splicer body has acclimatized to near the operating temperature.
Otherwise, the splicer might not work normally.
Do not disconnect AC cable from fusion splicer even if there is
enough battery capacity when heater is in operation. This
operation will cause the machine to shutdown.
The battery is made of Li-ion battery cells. Refer to following safety
instructions on handling and operating the battery safety.
CAUTION
Do not dispose of the battery in a fire, or leave the battery near an
object of high-temperature. Doing so may cause fire or explosion.
Do not short-circuit the recharging connector or the output
terminal of the splicer. Doing so may cause fire.
Charge the S947 battery by using the S124. Charging using other
equipment that is not suitable for charging the S947 battery, may