Furukawa electric S124, Руководство пользователя

Страница: 7 / 109

6
WARNING
Do not insert or drop any metal or any flammable material into the
main body through any gap. Doing so may cause fire, electric shock
or malfunction.
Avoid direct skin contact with the heating section. This may result
in burns or injury. A warning symbol is placed on the lid of the
protection sleeve heater as a notification.
Do not remove the bottom cover of the fusion splicer. Some parts
generate high voltage. Removing the panels may cause electric
shock.
If abnormal sounds or extra high temperatures are observed, turn
off the power, disconnect the power cord, remove the battery from
the fusion splicer, and contact Furukawa Electric Co., Ltd. or your
local representative. Continued operation under these conditions
may cause fire or electric shock.
Do not use a damaged power cord where the inner cable is exposed
or severed. Doing so may cause fire or electric shock.
If water is spilled into the fusion splicer, turn off the power switch,
disconnect the power cord, remove the battery, and contact
Furukawa Electric Co., Ltd. or your local representative. Continuing
to operate under these conditions may cause fire or electric shock.
If smoke or strange smells are observed, turn off the power switch,
disconnect the power cord, remove the battery, and contact
Furukawa Electric Co., Ltd. or your local representative. Continuing
to operate under these conditions may cause fire, electric shock or
malfunction.
If the fusion splicer is dropped and damaged, turn off the power
switch, disconnect the power cable, remove the battery, and
contact Furukawa Electric Co., Ltd. or your local representative.
Continuing to operate may cause fire or electric shock.
Do not look into a fiber with your bare eye during operation. The
wearing of protection goggles is recommended.