Furukawa electric S124, Руководство пользователя

Страница: 64 / 109

63
and retry Arc Check”. Perform another arc check to optimize the arc
power.
When executing the "Self Check” function, please use fibers that
have been stripped, cleaned and cleaved correctly.
6.7.2 Fiber Measurement
The S124 performs an auto or manual inspection of the fiber (specifically,
the clad and core offset, relative eccentricity, gap, fiber tilt and relative
cleave angle).
1st Result Screen (Bilateral measurement)
Parameter Description
Clad Offset Amount of clad offset between the two fibers.
Core Offset Amount of core offset between the two fibers.
Rel. Eccentricity Difference in eccentricity between the two fibers.
Gap The gap between the two fibers.
Fiber Tilt Angle at which the fibers come into the screen.
Rel. Angle The relative cleave angle between the two fibers.
2
nd
and 3
rd
Result Screen (Right and Left fiber measurement)
Parameter Description
Eccentricity Eccentricity of the fibers in micrometers.
Cleave Angle Cleave Angle of the fiber in degrees.
Clad Tilt Angle of Clad.
Clad Width Measurement of clad width in micrometers.
Core Tilt Angle of Core.
Core Width Measurement of core width in micrometers.
Focus Focus value (%).