Furukawa electric FITELNINJA NJ001 Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 94

Furukawa electric FITELNINJA NJ001 Скачать руководство пользователя страница 63

62

8.4.2 Fiber Measuring

The NJ001 performs an auto or manual inspection of the fiber (specifically,
the clad offset, gap, fiber tilt and relative cleave angle).
1.

Select “Fiber Measuring” in the “Tool” screen and the sub-menu is
displayed.

Fiber feed & Measuring: Fiber is fed automatically at the measuring
position, machine measures the fiber and displays the result.

Fiber Measuring: Performs the measurement only. Fibers must be
placed at an acceptable position manually. The results will be
displayed after the measurement.

Motor Manual Move: Allows the measuring process to be done
manually.

2.

Load fiber on the machine.

3.

Select  “Fiber  Feed  &  Measuring”  and  press  Enter.  The  machine
automatically  feeds  and  measures  the  fibers,  and  then  displays  the
result.

4.

Repeatedly press Escape until the Ready screen is obtained.

5.

The same content of results are displayed when the measuring is
performed, using “Fiber Measuring” sub-menu. Be sure to place the
fiber at an acceptable position before selecting the sub-menu.

6.

Refer to “8.4.4. Manual Splicing” for operating the “Motor Manual
Move”.

«
...
61
62
63
64
65
...
»

Содержание FITELNINJA NJ001































































































Отзывы:

Нет отзывов