11
2.4 Power Requirements
The NJ001 fusion splicer can also operate using AC power with the S978
AC adapter with AC power source that supplies between 100-240 V at a
frequency of 50-60 Hz. The S946 battery is charged by NJ001 through the
S978 AC adapter
WARNING
To avoid the risk of injury or death, ALWAYS observe the following
precautions before initializing the NJ001 fusion splicer.
If using a voltage-reducing auto-transformer to power the
NJ001 fusion splicer, ensure that the common terminal
connects to the grounded pole of the power source.
Use only the type of power cord supplied with the NJ001 fusion
splicer.
Connect the power cord to a power outlet equipped with a
protective ground contact only (never connect to an extension
cord that is not equipped with this feature).
Willfully interrupting the protective ground connection is
prohibited.
2.5 Toxic Hazards
The NJ001 fusion splicer presents no toxic hazards (under normal
conditions of use, storage, and handling). However, under the following
conditions, certain precautions are necessary.
2.5.1 Incineration
Some of the electronic components included in the assembly are
constructed with resins and other chemicals that produce toxic fumes
during incineration.