47
8.2.1 Setting
1.
Select “Setting” and press Enter in the pop-up menu.
2.
Select “Splice” or “Inspect” tab with
◄
►
. Select parameters with ▲ ▼
and press Enter to edit.
3.
Change the parameter with
◄
►
(increase/decrease appropriate digits)
and/or ▲ ▼ (actual value), and press Set.
4.
Press Edit End. The pop-up menu will show up and ask the following
questions.
Over Write: Replace the parameter with the edited value.
Other Location: Store the program with new/changed parameter to
a new location as a new program.
Cancel: Cancel the change and return to the previous screen.
5.
Return to the parameter list. Select another parameter for editing or
press Escape to complete the edit.