Field
Description
address for connections based on this profile.
The destination must be a device that can behave like an LNS.
UDP Source Port
Enter how the port number to be used as the source port for all
outgoing L2TP connections based on this profile is to be de-
termined.
By default, the Fixed option is disabled, which means that ports
are dynamically assigned to the connections that use this pro-
file.
If you want to enter a fixed port, activate option Fixed. Select
this option if you encounter problems with the firewall or NAT.
The available values are
to
'
.
UDP Destination Port
Enter the destination port number to be used for all calls based
on this profile. The remote LNS that receives the call must mon-
itor this port on L2TP connections.
Possible values are
...
'
.
The default value is
.
(RFC 2661).
The menu Advanced Settings consists of the following fields:
Fields in the Advanced Settings menu
Field
Description
Local IP Address
Enter the IP address to be used as the source address for all
L2TP connections based on this profile.
If this field is left empty, your device uses the IP address of the
interface used to reach the L2TP tunnel Remote IP Address.
Hello Intervall
Enter the interval (in seconds) between the sending of two L2TP
HELLO messages. These messages are used to keep the tun-
nel open.
The available values are
to
, the default value is
'
. The
value
means that no L2TP HELLO messages are sent.
Minimum Time
Enter the minimum time (in seconds) that your device waits be-
18 VPN
Funkwerk Enterprise Communications GmbH
346
bintec Rxxx2/RTxxx2
