Field
Description
The function is enabled with
#/
.
The function is disabled by default.
Address Mode
Only for Type =
0+(
Select how an IP address is to be assigned to the interface.
Possible values:
•
-%
(default value): The interface is assigned a static IP
address in IP Address/Netmask.
•
1@4
: An IP address is assigned to the interface dynamically
via DHCP.
IP Address/Netmask
Only for Address Mode =
-%
Enter the IP addresses (IP Address) and the corresponding
netmasks (Netmask) of the ATM interfaces. Add new entries
with Add.
MAC Address
Enter a MAC address for the internal router interface of ATM
connection, e.g.
66 66# 6'
. An entry is only re-
quired in special cases.
For Internet connections, it is sufficient to select the option Use
built-in (standard setting). An address is used which is derived
from the MAC address of the
!
.
DHCP MAC Address
Only for Address Mode =
1@4
.
Enter the MAC address of the internal router interface of ATM
connection, e.g.
66 66# 6'
.
If your provider has assigned you an MAC address for DHCP,
enter this here.
You can also select the Use built-in option (default setting) An
address is used which is derived from the MAC address of the
!
.
DHCP Hostname
Only for Address Mode =
1@4
.
If necessary, enter the host name registered with the provider to
be used by your device for DHCP requests.
Funkwerk Enterprise Communications GmbH
17 WAN
bintec Rxxx2/RTxxx2
297
