Field
Description
Administrative Status
Select whether the entry should be activated.
The function is enabled with
#/
.
The function is enabled by default.
Type
Specify how calls are to be routed.
Possible values:
•
0%%, ;/
: For calls forwarded by the media gateway to
a PBX or an ISDN TE connector or a SIP DDI client. For this,
the following can be used: PRI interfaces in NT mode, BRI in-
terfaces in NT mode, SIP accounts in trunk mode (server
mode).
•
1)
: For calls that are not to be routed (to be blocked).
Calling Line
You can restrict the application of the entry to the line on which
the call comes in.
The selection depends on the interfaces available and on the
SIP accounts that have been created.
Possible values:
•
,A % =B
: restricts the routing entry to the
selected PRI interface.
•
#A % =B
: restricts the routing entry to the
selected BRI interface.
•
A- 0%%B
: restricts the routing entry to the selected
SIP account.
•
0)
: No restriction of the entry.
Calling Address
You can restrict the application of the entry to a particular caller.
To do this, you must specify the subscriber number exactly (no
wildcards).
Called Address
Enter the called address to which the rule is to be applied.
To do this, enter an address numerically (e.g. a subscriber num-
ber) or alphanumerically (e.g. for a trunk) that is to be compared
with a dialled address.
20 VoIP
Funkwerk Enterprise Communications GmbH
400
bintec Rxxx2/RTxxx2
