Funkwerk R1202, Справочное руководство

Страница: 158 / 594

Field Description
Clock Rate Define whether the clock rate should be negotiated.
Possible values:
•
5=
: The clock rate is predefined.
•
0,
(default value): The clock rate is negotiated de-
pending on the line quality.
Note that a fixed value must be set to use the IMA mode (see
: (
) on at least one side (CO or CPE).
Wire Mode Define the number and combination of wires (depending on the
device type) used for the SHDSL connection.
Possible values:
• : 2 wires are used with m-pair bonding for a clock rate
of 192 kbps to 5696 kbps.
• : Four wires are used with m-pair bonding for a clock
rate of 384 kbps to 11392 kbps. This option supports 4-wire
mode under G991.2 and Globespan Enhanced Mode.
•
&
: Four wires are used for m-pair bonding
with a clock rate of 384 kbps to 11392 kbps. This option sup-
ports 4-wire mode under G991.2 but not Globespan En-
hanced Mode.
•
(0
: 4 wires are used with IMA for a clock rate of
384 kbps to 11392 kbps.
• : 6 wires are used with m-pair bonding for a clock rate
of 576 kbps to 17088 kbps.
•
(0
: 6 wires are used with IMA for a clock rate of
576 kbps to 17088 kbps.
• : 8 wires are used with m-pair bonding for a clock rate
of 768 kbps to 22784 kbps.
•
(0
: 8 wires are used with IMA for a clock rate of
768 kbps to 22784 kbps.
Additional Wire Pairs Only for Wire Mode = ,
&
,
(0
, ,
(0
.
For Wire Mode = ,
&
or
(0
the second pair of wires is defined here.
11 Physical Interfaces Funkwerk Enterprise Communications GmbH
144 bintec Rxxx2/RTxxx2