A login prompt appears first, regardless of how you access your device. You cannot view
any information on the device or change the configuration without authentication.
8.2.1 User names and passwords in ex works state
In its ex works state, your device is provided with the following user names and passwords:
User names and passwords in ex works state
User Name Password
Authorisations
!646
Read and change system variables, store configurations; use
Funkwerk Configuration Interface .
4
!-#
Read and write system variables (except passwords) (changes
are lost when you switch off your device).
!-#
Read system variables (except passwords).
It is only possible to change and save configurations if you log in with the user name
. Access information (user names and passwords) can also only be changed if you log
in with the user name
. For security reasons, passwords are normally shown not in
plain text but only as asterisks. The user names, on the other hand, are displayed as plain
text.
The security concept of your device enables you to read all the other configuration settings
with the user name
, but not the access information. It is therefore impossible to log in
with
, read the password of the
user and subsequently log in with
and
make changes to the configuration.
Caution
All bintec devices are delivered with the same username and password. As long as
the password remains unchanged, they are therefore not protected against unauthor-
ised use. How to change the passwords is described in
on page 82.
Make sure you change the passwords to prevent unauthorised access to your device!
If you have forgotten your password, you must reset your device to the ex works state,
which means your configuration will be lost.
8.2.2 Logging in for Configuration
Set up a connection to the device. The access options are described in
on
page 49.
Funkwerk Enterprise Communications GmbH
8 Access and configuration
bintec Rxxx2/RTxxx2
55
