Fukuda Denshi DSL-8001, Руководство по обслуживанию

Страница: 84 / 150

C A U T I O N
z There are following restrictions when connecting this system to the TCON
network.
y When the temperature unit is
°
F, the central monitor does not receive
the temperature measurement data.
y When the NIBP measurement unit is kPa, the central monitor does not
receive the NIBP Data. NIBP alarm setting cannot be changed on the
central monitor.
y Do not perform NIBP measurement from the central monitor via TCON
system when the NIBP measurement interval is set to [5] (Min.) or less,
or during the 1-minute or continuous measurement. However, it can be
stopped.
y
When the TCON network is constructed, temperature alarm setting
cannot be changed from the central monitor.
Installing TCON
C A U T I O N
Users should not perform the bidirectional wireless communications module
connection as malfunction of the equipment may occur.
●
Installing the HTC-702
Install the bidirectional wireless communications module HTC-702 using OAO-55A (Attachment for
HTC-702).
OAO-55A Contents
Check the contents before installation.
(1) Bracket for HTC-702 x1 (2) Screw - small (M3×8) x 2 (3) Screw - large (M4x25) x 2
1
. Secure the mounting bracket to the HTC-702 using the 2 large accessory screws (M4
×
25).
7 － 12