Fukuda Denshi DSL-8001, Руководство по обслуживанию

Страница: 137 / 150

●
Periodic Check Item
This maintenance check items are as follows.
No. Check Item
1 Appearance
2 Power
Supply
3 Display/Operation/Print
4 ECG
5 Respiration
6 Temperature
7
Non-Invasive Blood Pressure
8 Arterial Oxygen Saturation (SpO
2
)
9 Electrical Safety
●
Periodic Check Procedure
C A U T I O N
Before the check procedure, back up the setup data and patient data on the
USB memory.
No. Check Item Check Procedure Criteria
1 External appearance and Accessories
01 External
Appearance
Visually check the connector for
scratches, cracks, deformation, and
rust. No scratches, cracks,
deformation, and rust should be
found on the exterior.
02 Cables Check that neither damage nor
broken wire is found in all cables. Neither damage nor broken wire
should be found.
03 Recording Paper Visually check the setting condition. The paper should be correctly
set.
Neither damage nor
discoloration should be found.
04 Operation Manual Check that accompanying
documents such as Operational
Manual are stored in specified
location. Should be stored in specified
location.
No Check Item Check Procedure Criteria
2 Power Supply
01 Main Power Switch Check by connecting the power cable
of the main unit to AC and turning the
switch ON/OFF.
Check if the Main Power
Indicator lights on the AC
power supply.
02 Battery-charging
Operation
(Battery-installed
monitor)
Install the battery and check the
battery-charging operation by turning
the power switch ON/OFF and
OFF/ON. The charge lamp should
indicate the charge status.
03 Battery Operation
(Battery-installed
monitor)
After charging the battery, unplug the
power cable, and change to battery
operation. Check if the battery-operating
condition should be performed
as the operation manual
describes.
04 Battery Check when the battery needs to be
replaced.
Periodically replace the battery
according to the time for
replacement in the operation
manual.
No failure that operating time is
short despite the fully-charged
battery.
10 － 5