Fukuda Denshi DSL-8001, Руководство по обслуживанию

Страница: 83 / 150

TCON System Construction (For USA Only)
Bidirectional communication to the central monitor is possible by using the Bidirectional Wireless
Communication Module (HTC-702).
y Measured data can be sent to the central monitor.
y Alarm settings can be synchronized.
y NIBP can be measured from the central monitor.
TCON System Example
This section describes the TCON system example of the bedside monitor and the central monitor.
<Configuration Example of medical telemetry and TCON>
C A U T I O N
z Check that three antenna bar marks ( ) are displayed.
z Make sure that the TCON channel number between the bedside monitor
and central monitor is the same.
z Do not move the equipments during TCON operation. The radio waves
may not be transmitted.
z The alarm limit of HR and PR is linked with each other. Changing the HR
alarm limit will also change the PR alarm limit to the same value. The
alarm ON/OFF setting of HR and PR is also linked with each other.
Changing the alarm ON/OFF setting for HR will also change the setting for
PR.
Bedside Monitor : DSL-8001 System
ID :
1
Channel : 9
Bedside Monitor : DSL-8001 System
ID :
16
Channel : 9
Central Monitor : DS-7700 System
ID :
1
Channel : 9
(Max. 16 bedside monitors)
7 － 11