manualshive.com logo in svg

Fujitsu ROG30LMTA, Инструкция по эксплуатации

Поделиться
Скачать
Fujitsu ROG30LMTA Скачать руководство пользователя страница 18

01-16

When the outdoor heat exchanger temperature is lower than 0°C and the heating operation has been 

stopped for 0 minutes, power is applied to the compressor and the compressor is heated.

(By heating the compressor, warm air is quickly discharged when operation is started.)

When operation was started and when the outdoor heat exchanger temperature rises to 2°C or greater, 

preheating is ended. 

17.  COMPRESSOR PREHEATING

( Fig.10 : Compressor Preheating )

ON

0°C

 2°C

OFF

18.  10°C

 HEAT OPERATION

The 10°C HEAT operation functions by pressing 10°C HEAT button on the remote controller.

The 10°C HEAT operation is almost the same operation as below settings.

Mode                                Heating
Setting temperature           10°C
Fan mode                          AUTO

( Table17 )

19.  

ECONOMY OPERATION

The ECONOMY operation functions by pressing ECONOMY button on the remote controller.

The ECONOMY operation is almost the same operation as below settings.

Mode                               Cooling/ Dry                 Heating
Target temperature     Setting temp.+1°C    Setting temp.-1°C

( Table18 )

When the outdoor temperature is lower than 20°C and the all operation mode has been 

stopped for 30 minutes, power is applied to the compressor and the compressor is heated.

(By heating the compressor, warm air is quickly discharged when operation is started.)

When operation was started and when the outdoor temperature rises to 26°C or greater, 

preheating is ended. 

AMP Air Conditioning

www.ampair.co.uk | [email protected]

Содержание ROG30LMTA

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды