Fujitsu PRIMERGY TX140 S1, Руководство по модернизации и обслуживанию, Страница: 88 / 588

88 Upgrade and Maintenance Manual
TX140 S1
Basic hardware procedures
Ê
If required, install the rack mounting bracket and rack system into the rack
as described in the "Rack Mounting Kit - RMK-F2 Drop-In" Mounting
Instructions.
I
The printed poster is contained in the rack mounting kit.
Figure 35: Mounting the server onto the rack rails
V
CAUTION!
Ensure that the safety lock has been properly inserted into the snap fit
lock. For further information, refer to the "Rack Mounting Kit - RMK-F2
Drop-In" Mounting Instructions.
Ê
Fully extend the telescopic rails until they lock in place (1).
Ê
At a slight angle, lower the server onto the rear mounting point on the
telescopic rails (2).
Ê
Fold down the server (3). Ensure that all six rack mounting bolts are properly
seated in the mounting points on the telescopic rails and that the locking
bars engage (4).