Fujitsu PRIMERGY TX140 S1, Руководство по модернизации и обслуживанию

Страница: 304 / 588

304 Upgrade and Maintenance Manual
TX140 S1
Main memory
Ê
Shut down the defective server as described in section "Shutting down the
server" on page 61 .
Ê
Remove the AC power cord from the cable tie and disconnect it from the
system as described in section
"Disconnecting power cords" on page 63 .
Ê
When working on a rack-mounted server, extend it out of the rack as
described in section
"Extending the server out of the rack" on page 65 .
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page 66 .
Ê
Bring the server to its horizontal position.
Ê
Open the side / top cover as described in section "Removing the top cover"
on page 67 (rack server) or "Removing the side cover" on page 71 (tower
server).
Ê
Remove the fan module as described in section "Removing the fan module"
on page 208 .
Ê
Locate the defective expansion card using the onboard Local Diagnostic
LEDs as described in section
"Onboard indicators and controls" on
page 578 .
10.4.3 Removing a memory module
Ê
Identify the defective memory slot using the server management software.
Ê
Remove the defective memory module as described in section "Removing
memory modules" on page 300 .
10.4.4 Installing a memory module
Ê
Replace the defective memory module as described in section "Installing
memory modules" on page 296 .