Fujitsu PRIMERGY TX140 S1, Руководство по модернизации и обслуживанию

Страница: 450 / 588

450 Upgrade and Maintenance Manual
TX140 S1
System board and components
14.3.3.4 Re-installing the TPM
Figure 289: TPM spacer
Ê
The TPM spacer is already present on the system board.
Ê
Re-install the TPM board as described in section "Installing the TPM board"
on page 437 .
14.3.3.5 Concluding steps
Perform the following procedures to complete the task:
Ê
Reinstall the fan module as described in section "Installing the fan module"
on page 209 .
Ê
Close the side / top cover as described in section "Mounting the top cover"
on page 80 (rack server) or "Mounting the side cover" on page 85 (tower
server).
Ê
When working on a rack-mounted server, secure it in the rack as described
in section
"Sliding the server into the rack" on page 89 .
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page 87 .
Ê
Reconnect the AC power cord to the power supply unit and secure it with a
cable tie as described in section
"Connecting the server to the mains" on
page 90 .
Ê
If applicable, close the rack door as described in section "Closing the rack
door" on page 92 .