Fujitsu Oracle M10-1, Руководство по обслуживанию

Страница: 99 / 254

{0} ok setenv auto-boot? true
auto-boot? = true
{0} ok
printenv auto-boot?
auto-boot? = true
{0} ok boot
primary# ldm ls-spconfig
factory-default [current]
primary# ldm init-system -i /ldm-set1.xml
Initiating a delayed reconfiguration operation on the primary domain.
All configuration changes for other domains are disabled until the primary
domain reboots, at which time the new configuration for the primary domain
will also take effect.
primary#
shutdown -y -g0 -i6
primary# ldm bind ldom1
primary#
ldm start ldom1
Note - If the virtual function (VF) is lent to the logical domains by using the SR-IOV function,
the configuration of the virtual function may not be restored. Execute the ldm command to
manually restore the virtual function that is not restored.
The following example restores "auto-boot?" to "true."
3.
Boot Oracle Solaris.
4. On Oracle Solaris super user prompt, confirm that the system started with
factory-default.
5. Execute the ldm init-system command to reflect the setting in the saved XML
file.
This is an example of restoring configuration information saved in /ldm-set1.xml.
6. Execute the shutdown command, and restart the control domain.
7. Bind resources to a physical domain other than the control domain, and start
the domain.
In the following example, the user binds resources to ldom1 and starts it.
The following is an example.
Chapter 6 Understanding the Preparations for Restoring the System 85