Fujitsu Oracle M10-1, Руководство по обслуживанию

Страница: 70 / 254

primary#
ldm list-constraints -x > /ldm-set1.xml
primary#
more /ldm-set1.xml
<?xml version="1.0"?>
<LDM_interfaceversion="1.3" xmlns:xsi=http://www.w3.org/2001/XMLSchema-
instancce>
[Example]
primary# ldm list-io -l
NAME TYPE BUS DOMAIN STATUS
---- ---- --- ------ ------
:
/SYS/PCI0/IOVFC.PF0.VF0 VF PCIE0 XXXXX
[pci@8000/pci@4/pci@0/pci@8/SUNW,qlc@0,2]
Class properties [FIBRECHANNEL]
port-wwn = 10:00:00:14:4f:f8:38:99
node-wwn = 20:00:00:14:4f:f8:38:99
bw-percent = 0
:
/SYS/PCI1/IOVNET.PF0.VF0 VF PCIE1 XXXXX
[pci@8100/pci@4/pci@0/pci@1/network@0,80]
Class properties [NETWORK]
mac-addr = 00:14:4f:f8:b2:73
mtu = 1500
:
primary#
shutdown -i0 -g0 -y
4.
Execute the more command or a command with a similar function to confirm
that the configuration information is saved in an XML file.
To be prepared in case the saved file is lost, back up the file in another medium,
etc.
5. If the SR-IOV function was used to assign a virtual function (VF) to a domain,
execute ldm list-io -l to record the following information that has been set for
each VF:
- For a Fibre Channel HBA: port-wwn and node-wwn information that was set
when the VF was created
- For an Ethernet interface: MAC address that was set when the VF was created
6. Stop the logical domains and put them in the OpenBoot PROM state.
Before powering off the system, stop the logical domains by following an
appropriate procedure and perform the ldm unbind command to put them in
inactive state.
7.
Execute the printenv command to confirm the OpenBoot PROM environment
variables, and save the output data.
If there is any item omitted with "...", check the item again.
Fujitsu M10-1/SPARC M10-1 Service Manual ･ June 2021 56