Fujitsu Oracle M10-1, Руководство по обслуживанию

Страница: 96 / 254

PSB Test Fault
---- ------- --------
00-0 Passed Normal
XSCF>
XSCF>
restoreconfig -V file:///media/usb_msd/backup-file.txt
3. From the execution result of "probe-scsi-all", confirm that the mounted
internal disks are recognized.
4.
From the execution result of "show-devs", confirm that the mounted PCIe
cards are recognized.
5. From the execution result of the initial diagnosis, confirm that "Passed" and
"Normal" are displayed for all the PSBs.
6.5 Restoring Setting Information and
Configuration Information
6.5.1 Restoring XSCF setting information
This section describes how to restore the XSCF setting information saved to the USB
device in " 5.6.1 Saving XSCF setting information ."
1.
Log in to the XSCF shell.
2. Execute the restoreconfig command to restore the XSCF setting information.
For details, see "10.10 Saving/Restoring XSCF Settings Information" in the Fujitsu
SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide .
6.5.2 Confirming that the logical domain configuration is
the same as that before memory was installed
This section describes the procedure for checking whether the amount of assigned
memory is the same as that recorded as described in " 5.3.2 Checking the assignment
status of I/O devices ."
1.
Log in to the control domain.
2. Execute the ldm list-domain command, and confirm that the operating
conditions of logical domains and the amount of memory assigned to each
logical domain are the same as those before memory was installed.
Fujitsu M10-1/SPARC M10-1 Service Manual ･ June 2021 82