manualshive.com logo in svg

Fujitsu ABHG18KRTA, Руководство по обслуживанию

Поделиться
Скачать
Fujitsu ABHG18KRTA Скачать руководство пользователя страница 431

6.

When [Cancel button] is pressed twice while “Function setting” screen is displayed, it switches
to the “Submenu” screen.

Back:

Setting:

Date and time

Submenu  

[

1/2

]

Monitor

Screen
Filter sign
R.C. sensor control
Room temp. display

Off
Off

Mo 10:00AM

Cancel:                              OK: 

Function setting                           

Mo 10:00AM

   R.C.                Function          Setting
  address        No.                No.

 Version                        Error history

00

     

      30

01

If no button is pressed within 60 seconds after buttons mentioned above are pressed, it will au-
tomatically exit the function setting mode.
If you exit the function setting mode unintentionally during setting, enter the mode again ac-
cording to the procedure in step 2.

Setting up each indoor unit

Repeat the procedures from step 1 to 6, and set up the indoor units requiring function setting.

Resetting the power after setting up function of all indoor units

NOTES:

• If the reset is not performed, function cannot be read correctly.
• After all the functions have been set, the circuit breaker needs to be switched off for at least 2

minutes.

– After the 2 minutes has passed, power can be restored.
– The set function is stored in the PCB and will remain in memory even when the power of in-

door unit is turned off.
However setting function is effective after disconnecting the power supply and then recon-
necting it.

• Record the latest configuration of the indoor unit function setting on a label, and put the label on

the unit so it can be used for after-sales service operations.

1-3. Indoor unit (setting by wired remote controller)

- (05-27) -

1. Function settings (for indoor unit)

FIELD

WORKING

FIELD

WORKING

Содержание ABHG18KRTA
























































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды