manualshive.com logo in svg

Fujitsu ABHG18KRTA, Руководство по обслуживанию

Поделиться
Скачать
Fujitsu ABHG18KRTA Скачать руководство пользователя страница 295

¢

Air conditioner registration pairing method

Choose the following modes to connect the air conditioner to the wireless LAN router.

NOTES:

• Before starting this setting, wait for 60 seconds or more after the power supply is connected to

the air conditioner (via breaker or plug).

• Check that the smartphone or tablet PC is linked to the wireless router to be connected to the

air conditioner.
The setting does not work if the same wireless LAN router is not connected.

• The displayed screen design may differ depending on the version of the mobile app.
• To control 2 or more air conditioners with the same smartphone or tablet PC, repeat the setup of

the chosen mode.

Light pattern:

Off

On

 Flashing

Button mode

1.

Launch the mobile app.

FGL air

2.

Sign in with your e-mail address and password following the screen on the mobile app.

[email protected]

ÛÛÛÛÛÛ

Sign in

3.

Press the + button to add a new air conditioner.

+

4.

Confirm that the LED 2 blinks (on/off at 2 seconds intervals). Then select Button mode on the
screen. If the LED 1 and 2 are off, push the setting button once.

Button mode

Manual mode

on/off: 2 sec/2 sec

5.

Press the WPS button on the wireless LAN router to be connected.
For the button location of the wireless LAN router and how to press it, refer to the operation
manual of the wireless LAN router.

 Wireless router

4-6. Mobile app setting method

- (03-79) -

4. Troubleshooting with error code (For wireless LAN adapter)

TROUBLESHOOTING

TROUBLESHOOTING

Содержание ABHG18KRTA
























































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды