Fujitsu Siemens Computers STYLISTIC ST50XX, Руководство пользователя

Страница: 34 / 79

Using the Tablet PC
26 A26391-K145-Z120-1-7619, edition 3
Charging the battery
► Install the battery (see the "Removing and installing the battery" section).
► Connect the power adapter to the Tablet PC.
The DC Input icon appears in the Status display.
Look at the Battery Gauge icon in the Status display to determine the percent of charge in the
battery. See the "Status display" section in the "Getting Started" chapter for a description of the
Battery Gauge icon.
Further information about the battery charging time can be found in chapter "Technical data".
Also note the following with respect to charging the battery:
● You can use the system, suspend system operation, or shut down and turn off the system
without interrupting the charging process. However, using the system while the battery is
charging will cause the battery to charge at a slower rate.
● The Tablet PC battery uses Lithium ion battery cells which have no "memory effect". You do
not need to discharge the battery before you begin charging.
Removing and installing the battery
The battery can be removed from the Tablet PC and swapped with a charged battery. The
discharged battery can then be charged in an external charger if one is available.
► Select one of the following options for prepare for removing the battery:
–
If a charged battery is available, you can suspend system operation. A built-in buffer
battery will maintain the system in Suspend-to-RAM mode for about 5 minutes while the
battery is removed. This allows time for replacement with a charged battery.
– If a charged battery is not available, save your work and close all running programs, then
shut down the system or initiate Hibernate mode.
– Plug in an external DC power source.