Fujitsu Siemens Computers STYLISTIC ST50XX, Руководство пользователя

Страница: 51 / 79

Security functions
A26391-K145-Z120-1-7619, edition 3 43
Configuring password protection in BIOS Setup
!
Before using the various options of password protection for your data security in the BIOS
Setup , please note the following hint:
Please keep in mind your passwords in any case, as you will not be able to access your
BIOS Setup and/or your system any longer, if you forget both the user password and the
supervisor password.
Passwords are not covered by your warranty and a charge will be made for assistance.
i
Passwords can be up to eight characters long. You can use all alphanumeric characters
and need not distinguish between uppercase and lowercase characters.
Password protection for BIOS Setup (supervisor and user
password)
We recommend that you print out the following instructions, as these cannot be displayed while
setting the password.
You prevent unauthorised opening of the
BIOS Setup with both the supervisor and the user
password. With the supervisor password you have access to all functions of the BIOS Setup , and with
the user password only to part of the functions. You can only set a user password if a supervisor
password has already been assigned.
Set the supervisor and user password
► Call
BIOS Setup
and select the
Security
menu.
► Mark the
Set Supervisor Password
field and press the Enter key.
With Enter new Password you will then be asked to enter a password.
► Enter the password and press the Enter key.
With Re-Enter new Password you are asked to confirm the password.
► Enter the password again and press the Enter key.
With Notice: Changes have been saved you receive a confirmation that the new password has been
saved.
► To assign the user password, mark the field
Set User Password
and proceed exactly as when
configuring the supervisor password.
If you do not want to make any other settings, you can exit BIOS Setup .
► Select the Exit Saving Changes option in the Exit menu.
The Tablet PC is rebooted and the new password is effective. If you now want to open the BIOS
Setup , you must first enter your supervisor or user password. Please note that you only have access
to a few BIOS settings with the user password.