Fujitsu Siemens Computers STYLISTIC ST50XX, Руководство пользователя

Страница: 63 / 79

A26391-K145-Z120-1-7619, edition 3 55
Troubleshooting and tips
In the following sections possible solutions to problems that may occur are described. If you are
experiencing a problem with your Tablet PC that you cannot solve by taking the actions described,
contact your sales partner or hotline/help desk for further assistance.
System will not resume operation
If the system will not resume operation after system operation has been suspended, check the
following possible causes:
● The battery may either be defective, or discharged to the critically low level. When the battery
reaches the critically low level, the system is forced into Suspend-to-RAM mode to avoid a
total system power failure. To correct this problem, either connect an external power supply
(such as the power adapter), or install a charged battery in the Tablet PC.
● The system may be at the critical thermal limit. System operation cannot be resumed until the
device cools off to the permissible temperature. Move the Tablet PC to a cooler location.
Display screen is blank or difficult to read
If the display screen of your Tablet PC appears blank or is unreadable, confirm that the system is
running (the power indicator is displayed on the status display), and check the following:
● The system brightness may be set too low, causing the screen to appear too dark. To change
brightness, press the
Fn button twice to open the Fujitsu Menu . This menu contains the tab for
changing the brightness.
● The video timeout may have expired. Tap on the display screen to reactivate the display. Note
that this is a normal, power-saving feature.
Cursor is not tracking pen
If the cursor on the screen appears to be misaligned with the pen or is not accurately tracking the
pen, calibrate the pen.
To calibrate, please run the
Tablet and Pen Settings function in the Control Panel.