78
A26361-K879-Z102-3-7619
Hot-swap Hard Disk Drive
Hot-plug/Hot-swap Components
Removing the dummy module
Ê
Press the upper and lower tabs on the dummy module together (see
figure 32 on page 78) until the locking mechanism disengages, and remove
the dummy module from the slot.
Installation of the dummy module occurs in reverse order.
V
CAUTION!
Keep the dummy module for future use. If the HDD module is removed
again and not replaced with a new module, then the dummy module must
be reinstalled due to cooling, the applicable EMC (electromagnetic
compatibility) regulations and fire protection.
Figure 32: Dummy module and corresponding HDD module
Installing the HDD module
Ê
Solve the locking mechanism by pressing the locking button (1).
I
If the HDD modules are provided with a transport lock (1 in figure 3
on page 26) remove these before you open the locking mechanism.
Ê
Push the handle of the HDD module fully in the direction of the arrow.
