46
A26361-K879-Z102-3-7619
Installing/Removing the Rack Model
Hardware Installation
Figure 21: Mounting the spreader bar and fastening the server
Ê
Slide the server into the rack (1).
V
CAUTION!
Never lift the server into the rack using the handles on the front panel.
Ê
Place the cage nuts for fastening the front panel in the corresponding holes of
the front support uprights and fasten the server using four knurled screws (2).
Ê
The HDD modules are provided with a transport lock. Remove these before
you setup the server (see figure 3 on page 26).
Ê
If the server is installed in a PRIMECENTER or a DataCenter Rack, position
with inserted server the supplied spreader bar (3) in the corresponding holes
(4) of the two telescopic rails.
To remove the server, follow the same procedure in the reverse order.
