A26361-K879-Z102-3-7619
45
Hardware Installation
Installing/Removing the Rack Model
Figure 19: Installing the server
Ê
Lift the server onto the two projecting telescope bars.
Ê
Position the server so that the holes of the telescopic bars are in line with
those of the server. When doing this, ensure that the telescopic bars are kept
in a locked position.
Ê
Secure the telescope bars to the server using three M4x6 screws: on the left
side, one screw on the center hole and on the right side, one screw on the
center hole and one screw on the rear hole.
The following steps can then be carried out by one person only.
Figure 20: Telescope bar with safety spring
Ê
Press in the safety springs (1) on both telescopic bars.
