FujiFilm SD1125S2 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 68

background image

PART Ⅰ FOR SAFE WORK

●

SAFETY LABEL

■ SAFETY LABEL

●

Safety labels are attached on the machine for safe work. Check them carefully and be sure
to follow the instructions.

●

In case mud is on the labels, wipe it completely so that the labels are always visible.

●

In case the labels are damaged, lost, or difficult to understand, replace them with new labels.

●

When replacing parts to which safety labels are attached, contact your dealer and order
the labels also.

●

When ordering safety labels, refer to "Location and meaning" below, and tell your dealer the
code and quantity of necessary label.

●

If high pressured water is sprayed over the labels, they may fall off. Do not spray the labels
with high pressured water.

■ LOCATION AND MEANINGS

※

Safety labels on the engine are explained

in "Engine manual". Read it well.

A. WARNING! Pay attention to safety.
B. WARNING! Read the operation manual carefully.
C. DANGER! When carrying out service, stop the engine and remove engine key.
D. DANGER! When the engine is running, do not look into auger. Keep hands and feet away from auger.
    Failure to comply may result in getting caught in the machine and death.
E. DANGER! When removing snow from auger, be sure to stop the engine, and use installed unclogging stick.
   Failure to comply may result in getting caught in the machine and death.
F. DANGER! Be sure to attach the covers to correct positions. Using the machine without covers may result in injury.
G. WARNING! Be careful of exhaust fumes. Exhaust fumes contain poisonous gas which may cause death.
H. DANGER! Start moving the machine slowly. Before starting, be sure to check the safety in traveling direction,
   and then, set travel clutch at "On" position. Failure to comply may result in death.
I. DANGER! Do not stop the machine on slope. Do not set change lever at "Neutral" position on slope or
   when loading/unloading the machine on a truck. The machine may slip down, and injury may occur.
J. WARNING! Do not turn chute toward people and buildings during work. Scattered objects may cause injury and
   damage.
K. DANGER! Keep people away from the machine during work.
L. CAUTION! Do not open or remove safety shields while engine is running.

SDS1-20

A B C

D E F

A

C

H

J

B

G

I

K

8600-13-73-0
MARK/CAUTION B/ISO

0076770
LABEL/PANEL/CONTROL

0079340
LABEL/PANEL/COVER

L

- 15 -

«
...
18
19
20
21
22
...
»

Содержание SD1125S2





































































Отзывы:

Нет отзывов

Похожие инструкции для SD1125S2

Бренд: PALSON Страницы: 32

EASY SWEEP COMPACT 2484 Series

Бренд: Bissell Страницы: 2

Бренд: Gardena Страницы: 11

Бренд: Murray Страницы: 159

Бренд: Black+Decker Страницы: 84

Бренд: Gaggenau Страницы: 28

Бренд: Poulan Pro Страницы: 32

Бренд: Husqvarna Страницы: 32

Бренд: MTD Страницы: 28

Бренд: White Страницы: 32

Snow King 566TGE

Бренд: Texas Страницы: 45

SNOW KING 6521WDE

Бренд: Texas Страницы: 48

Бренд: Toro Страницы: 16

Бренд: KENT Страницы: 52

Бренд: Toro Страницы: 164

Бренд: Ivation Страницы: 3

Бренд: Troy-Bilt Страницы: 16

Бренд: Parkside Страницы: 156

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды