manualshive.com logo in svg

FujiFilm SD1125S2, Руководство по эксплуатации

Поделиться
Скачать
FujiFilm SD1125S2 Скачать руководство пользователя страница 21

PART Ⅰ  FOR SAFE WORK

A. WARNING! Pay attention to safety. 
B. WARNING! Read the operation manual carefully.
C. DANGER! When carrying out service, stop the engine and remove engine key.
D. DANGER! When the engine is running, do not look into chute. Keep hands away from chute. When removing 
    snow from chute, be sure to stop the engine, and use installed unclogging stick. Failure to comply may 
    result in getting caught in the machine and injury.
E. WARNING! Do not turn chute toward people and buildings during work. Scattered objects may cause 
   injury and damage.
F. DANGER! Keep people away from the machine during work.
G. WARNING! Pay attention to safety. Do not cause short-circuit and spark with tools. Recharge the battery 
   in a well-ventilated place. Refer to the manual for use of booster cable.
H. DANGER! When handling battery, do not keep fire such as short-circuit, spark, and cigarette near the machine.
I. DANGER! When handling battery, be sure to wear safety glasses and protective gear.
J. DANGER! The battery may explode if it is handled inappropriately. Do not use when fluid level is under 
   the lower limit. Using the battery with fluid level under the lower limit may cause explosion.
K. DANGER! Eyesight may be lost or a burn may occur because of battery fluid. If battery fluid comes into contact,
    flush out with a large quantity of water immediately. If it comes into eye, see a doctor.
L. CAUTION! Do not open or remove safety shields while engine is running.

SDS1-22 

SDS1-21 

A            B            C 

D            E            F 

G           B            H           

I            J            K 

0079340 
LABEL/CAUTION/COVER 

L 

8600-13-74-0 
MARK/CAUTION C/ISO 

8600-13-75-0 
MARK/CAUTION D/ISO 

- 16 -

Содержание SD1125S2





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды