PART II OPERATION BEFORE USING THE MACHINE
3．NAME AND WORK
●
The No. shown below are equivalent to the number listed in "NAME OF PARTS" (p.19 - 20).
No.
Operate when starting, operating, or stopping the engine.
●
"Stop" - Stop the engine.
●
"Run" - Run the engine.
●
"Start" - Start the engine (starter motor).
●
Take your hand off the engine key immediately when the
engine starts at "Start" position.
Operate when starting the engine.
●
If the knob is pulled, compressed fuel is supplied to the engine and makes
the starting easy.
Operate when controlling engine rotation.
●
" : high speed" (move the lever to upper side) - high revolution.
●
"
: low speed" (move the lever to lower side) - low revolution.
Operate when switching the travel speed.
●
"High speed" - tilt the lever from "N.Neutral" position to "high speed" side.
Speed range that is suitable for high speed movement.
●
"Low speed" - tilt the lever from "N.Neutral" position to low speed side.
Speed range that is suitable for snow removal work or
low speed movement.
"N.Neutral" is the middle point of "Low speed" and "High speed", in a state
where the change gear is not engaged. In this position, the machine does
not travel even though the travel clutch lever is at "On".
Operate when switching forward/backward and controlling travel speed.
●
"Forward" (set the lever to "Forward " side from "Neutral point") -
the machine goes forward.
●
"Backward" (set the lever to "Backward" side from "Neutral point") -
the machine goes backward.
"Neutral point" is the middle point between "Forward" and "Backward".
In this position, the machine does not travel even though the
travel clutch lever is at "On". The travel speed will increase as the lever is tilted from
"Neutral point" and will decrease as return the lever.
●
Operate the change lever slowly.
●
The change lever can be fixed at any position when the travel
clutch lever is set at "On". When set to "Off", it will return
to "Neutral point".
Operate when moving the machine.
●
"On" (hold the lever) - the machine travels.
●
"Off" (release the lever) - the machine stops traveling.
●
The parking brake is applied automatically when the travel
clutch lever is set at "Off".
Operate when rotating auger and blower.
●
"On" (push the lever forward) - auger and blower rotate.
●
"Off" (pull the lever backward) - auger and blower stop rotating.
●
When the travel clutch lever is set at "On", the work clutch
lever can be fixed at "On".
●
When the travel clutch lever is set at "Off", the work clutch
lever is interlocked and also becomes "Off".
⑥
Work clutch lever
④
Change lever
②
Choke knob
⑤
Travel clutch lever
NAME
WORK
①
Engine switch
Engine key
③
Throttle lever
Stop
Run
Start
SUPPLEMENT
N.Neutral
Neutral point
IMPORTANT
IMPORTANT
SUPPLEMENT
SUPPLEMENT
- 21 -