PART II OPERATION BEFORE USING THE MACHINE
No.
Operate to change the traveling direction.
●
"Left" (pull left lever to operator side) - the machines turns to left.
●
"Right" (pull right lever to operator side) - the machine turns to right.
Operate when adjusting snow throwing direction.
●
"Left" (tilt the lever to left side) - chute rotates to left.
●
"Right" (tilt the lever to right side) - chute rotates to right.
Operate when adjusting snow throwing distance.
●
"Up" (tilt the lever to rear side : deflector faces up) -
the machine throws snow far.
●
"Down" (tilt the lever to front side : deflector faces down) -
the machine throws snow near.
Operate when adjusting the height of auger housing.
●
"Up" (tilt the lever to rear side) - auger housing rises.
●
"Down" (tilt the lever to front side) - auger housing goes down.
Operate when adjusting the tilt of auger housing.
●
"Left" (tilt the lever to left) - auger housing tilts left.
●
"Right" (tilt the lever to right) - auger housing tilts right.
Operate when turning on head light, work light, panel light, and foot light.
●
"On" (lift the knob)
- Head light, work light, panel light, and foot light are on.
●
"Off" (lower the knob)
- Head light, work light, panel light, and foot light are off.
●
Even if the light switch is "Off", the panel light lights up
for 10 seconds after turning the engine key to
"Stop" position.
●
Head light and work light do not light up even the light
switch is "On", if the switch on the back of the lights is
not set at "On".
Operate when honking the warning horn.
●
When you press the button, the warning horn sounds and alert the
surroundings.
Operate when releasing the blower brake temporarily to replace the shear bolts.
●
"Release" (pull the lever up) - the blower brake is released and the blower
and auger can be moved manually.
●
"Lock" (return the lever) - the blower brake is applied and the blower
and auger are locked.
When it is activated, the machine stops traveling.
●
When the backward emergency stop device is activated, the change
lever returns to "Neutral point" and the machine stops traveling.
●
Hour meter
It indicates the operation time of the machine.
●
The hour meter activates when the engine key is
at "Run" position.
●
The minimum time display is "0.1 hour" (6 minutes).
●
Fuel gauge
It indicates the amount of remaining fuel in the 9-level
of the gauge.
●
"E " - Empty
●
"F" - Full
●
When the red gauge blinks, the
amount of remaining fuel is about
5 liters. Please refuel early.
⑭
Monitor
(meters)
⑩
Light switch
⑪
Warning horn button
⑫
Blower brake release
lever
NAME
WORK
⑦
Side clutch lever
(Left/Right)
⑬
Backward emergency
stop device
⑧
Chute control lever
⑨
Auger housing control
lever
SUPPLEMENT
SUPPLEMENT
- 22 -
