Fujian Xingyi Polishing Machine Co.,Ltd
Manual Of Remote Control Floor Grinder 800-4E
Factory Addresss:NO.C2 ,Area 11 ,AnPing Development Area, Quanzhou ,Fujian province ,China
Postal Code:362200
Tel: +86-595-36792992
Mob: +86-15960788816
Use only Xingyi parts and accessories, For your own safety, The Safety of others and the life of your machines.
49
5.4 Changing abrasive
When machine need to change the abrasive, the mainly steps are the same as
manual,please find in Manual
Note:
1
、
Before changing abrasives, must turn on the emergency of the remote controller, pull
out of the power source.
2
、
When grinding, the dust suction is harmful, pls wear the professional mask to check
the human safety.
3
、
Upwards, lay down the machine, must remember the human safety , in case of the
damage of the machine.
4
、
When operating the machine, pls remember the protection mask, working suite,
insulate shoes, protection gloves.
5
、
Please ensure machine would not forward of the machine , so could be change
abrasive.
6
、
When machine has been running for a while, abrasive , grinding plate and gear box
will produce high temperature, pls warning to burn when change abrasive.
5.5 The best grinding route
The best grinding route is the same as manual
When grinding, must remember not press the cable.
When remote grinding ,must remember the obstructions , in case of damage the machine or
human safety.
Note:
When grinding,please must remember the indicator light of the remote controller, when
near to power off, must change battery in time, and stop grinding to charge the remote
grinding machine.
When grinding , must notice the sigh situation from the remote controller.
when grinding, control the remote controller direction just need to stir softly.
