Fujian Xingyi Polishing Machine Co.,Ltd
Manual Of Remote Control Floor Grinder 800-4E
Factory Addresss:NO.C2 ,Area 11 ,AnPing Development Area, Quanzhou ,Fujian province ,China
Postal Code:362200
Tel: +86-595-36792992
Mob: +86-15960788816
Use only Xingyi parts and accessories, For your own safety, The Safety of others and the life of your machines.
54
6.3.3
、
Clean up the grinding plate conversion
Tilted the machine and use a cross screwdriver to remove the pads,use shovel to remove
dust. If you do not clean up in time, it is possible to make the pads unconnect well, and pads
fly out when grinding, causing damage to the machine and personal safety threats
6.3.4 Attention
1. Be sure to unplug the plug from the outlet and then clean, maintain, or assemble it.
2. Be sure to clean the entire equipment after the end of the day. Do not use a high pressure
cleaner to clean the machine directly.
3. In order to allow the machine to cool effectively, the cooling air port must remain open and
clean.
6.4 Attention of grinder Battery For charge.
During the machine working will be in charge automatic, The battery is lead acid battery, In charge
2-3 hours, It can endurance 25mins for transportation without power. And the power life three years.
During the machine not working for in charge, Must be reset Emergency button connect power for
in charge