Fujian Xingyi Polishing Machine 800-4E Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 65

Fujian Xingyi Polishing Machine 800-4E Скачать руководство пользователя страница 44

Fujian Xingyi Polishing Machine Co.,Ltd

Manual Of Remote Control Floor Grinder 800-4E

Factory Addresss:NO.C2 ,Area 11 ,AnPing Development Area, Quanzhou ,Fujian province ,China

Postal Code:362200

Tel: +86-595-36792992

Mob: +86-15960788816

Use only Xingyi parts and accessories, For your own safety, The Safety of others and the life of your machines.

44

When the machine is stopped, it is advisable to unplug the power supply for safety

reasons.
Emergency stop switch only can be rotated and downward pressure follow the direction
instructions on the emergency stop switch, can not pull up.

4.5 Replace abrasives

When changing the abrasive, need adjust the machine to the upright position, then tilt

the machine, carefully flatten the machine. After flattening the machine, stand next to the
machine, check the machine is stable, then use flat-blade screwdriver to replace the
abrasive, put a new one.

Note:
Please make sure the machine does not move forward, then can replace the abrasive;
When the machine is running for a while, the abrasive, the grinding disc, and the

gearbox will produce high temperatures. Please note to avoid burns when replace abrasive.

Please replace the abrasive on the condition of power unplugged and emergency stop

pressed.

«
...
42
43
44
45
46
...
»

Содержание 800-4E


































































Отзывы:

Нет отзывов