Fujian Xingyi Polishing Machine Co.,Ltd
Manual Of Remote Control Floor Grinder 800-4E
Factory Addresss:NO.C2 ,Area 11 ,AnPing Development Area, Quanzhou ,Fujian province ,China
Postal Code:362200
Tel: +86-595-36792992
Mob: +86-15960788816
Use only Xingyi parts and accessories, For your own safety, The Safety of others and the life of your machines.
39
Note
：
When pulling out the clutch pin, it may be fasten, need to shake the machine
while pull out the clutch pin.
Pay attention to their own safety when tilt the machine, we must do what we can
do.
Take out the grinding pads to prevent it drop is lost before transport, resulting in
unnecessary losses.
When using manual push, the clutch must be unlocked.
Using hand-push way when clutch device in the locked state, result the drive
motor damage!
When rotating the support wheel, remember do not to rotate to the highest
position, to prevent the support wheel off lead and the final hole is not aligned well.
Rotate the support wheel, it is necessary to always pay attention to the disc from
the ground height, can not be too low to prevent the disc shaking lead to collision with the
ground, damage the disc; recommended disc minimum position from the ground is 25mm.
