Fujian Xingyi Polishing Machine Co.,Ltd
Manual Of Remote Control Floor Grinder 800-4E
Factory Addresss:NO.C2 ,Area 11 ,AnPing Development Area, Quanzhou ,Fujian province ,China
Postal Code:362200
Tel: +86-595-36792992
Mob: +86-15960788816
Use only Xingyi parts and accessories, For your own safety, The Safety of others and the life of your machines.
50
When grinding ,need to notice the cable , in case of the cable be pressed.
When grinding ,must remember the barrier in the side, in case of damage of the
machine and human safety.
Before grinding,must check the clutch is reset,if not, the machine could not move on.
6
、
Equipment maintenance
6.1
、
Overview
We recommend that the grinding machine be checked regularly to extend the service
life.
Note:
During the maintenance and repair process, the power of the grinder must be
disconnected.
Use protective equipment such as safety shoes, protective gloves, protective masks,
etc.
6.2 Daily check
6.2.1 Check the switches
The emergency stop switch should rotate along the rotation direction of the switch, turn
the motor positive and negative knob to start the machine to see whether the machine starts.
(Safe normal start the machine, the running light will light up, if not normal start, then will
have the error code showed on the display screen)
Turn on the grinder and press the emergency stop switch to see if the machine stops.
Turn on the emergency stop switch, open the LED switch, check whether the LED lights
open or not.
Note:
For safety reasons, it is highly recommended to press the emergency stop switch when
you stop the machine, it is safer.