Fuji Xerox DocuPrint CM115 w, Руководство пользователя

Страница: 124 / 267

124 Copying
5
If necessary, customize the copy settings such as number of copies, copy size, and image quality.
See also:
• "Setting Copy Options" on page 122
6
Press the ( Start ) button to start copying.
 Collated
Sort the copy outputs. For example, if you make two sets of a three-page document, the first set will be printed
followed by the second set.
NOTE:
• Copying documents with a large amount of data may exhaust available memory. If a memory shortage occurs, cancel the
collating by turning
Collated
to
Off
on the operator panel.
1
Place a single document facing down on the document glass and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 121
2
Press the Copy button.
3
Select
Collated
, and then press the button.
4
Select the desired setting, and then press the button.
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
5
If necessary, customize the copy settings such as the number of copies, copy size, and image quality.
See also:
• "Setting Copy Options" on page 122
6
Press the ( Start ) button to start copying.
When
Collated
is set to
On
, the display prompts you for another page. Select
Yes
or
No
, and then press the
button.
If you select
Yes
, select
Continue
or
Cancel
, and then press the button.

Reduce/Enlarge
Reduce or enlarge the size of a copied image, from 25% to 400%.
NOTE:
• When you make a reduced copy, black lines may appear at the bottom of your copy.
• This item is available only when
N-Up
is set to
Off
or
Manual
.
1
Place a single document facing down on the document glass and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 121
2
Press the Copy button.
Off
* Does not sort the copy output.
On
Sorts the copy outputs.