6 - 1
6. SETTING AND CALIBRATION
6.1 Switch of range
6.1.1 Setting of range switch mode
Set the range switch mode as follows.
(1) Press the
MODE
key in measurement mode
WRGLVSOD\WKH8VHUPRGHVFUHHQ
0RYHWKHFXUVRUWR³6ZLWFK5DQJHV´DQG
press the
ENT
key.
7KH³&KDQQHO6HOHFWLRQ´VFUHHQDSSHDUV
0RYHWKH
cursor by pressing the
or the
key on the channel selection
VFUHHQWKDWDSSHDUVDQGVHOHFW&KFRP
-
ponent).
(4) Then press the
ENT
key.
(5) Selected range switch mode is highlight-
ed.
Press the
or the
key to select a
desired switch mode.
(6) Then press the
ENT
NH\WRFRQ¿UPWKH
selection.
,I³05´LVVHOHFWHGWKHFXUVRUPRYHVWR
³5DQJH6ZLWFK´
(
)
ENT
MODE
ENT
ENT
MR : Select a desired range on this screen.
RR : Select a desired range according to
the remote range switch contact input.
AR : Automatically switched from Range 1
to Range 2 when the measured concen-
tration exceeds 90% of Range 1.
Automatically switched from Range 2
to Range 1 when the measured concen-
tration becomes smaller than 80% of
Range
1.
* Operation set for each Ch only can be
performed.
Description of setting
Range switch
or previous screen
Measurement Mode
