3 - 14
Terminal block 3
<TN3>
11
12
13
14
15
16
17
18
19
20
1
2
3
4
5
6
7
8
9
10
(M3.5 screw)
Ch4 range identification
contact output (RNG_ID Ch4)
Ch5 range identification
contact output (RNG_ID Ch5)
Ch3 range identification
contact output (RNG_ID Ch3)
Ch2 range identification
contact output (RNG_ID Ch2)
Ch1 range identification
contact output (RNG_ID Ch1)
Auto calibration
remote start
input (R_CAL)
Average value reset
input (RESET)
Remote hold input
(R_HOLD)
Pump ON/OFF
input (R_PUMP)
Unassigned
Terminal block 3 <TN3>
%HWZHHQ± )RULQWHUQDOFRQQHFWLRQ0XVWQRW
EHZLUHG0XVWQRWEHXVHGDV
junction terminal.)
%HWZHHQ± 3XPS212))LQSXW3XPSRQ
when open. Pump off when short-
circuited.
%HWZHHQ± 5HPRWHKROGLQSXW1RKROG
when open. Output hold when
short-circuited.
)RUGHWDLOVUHIHUWR³6HFWLRQ
3DUDPHWHUVHWWLQROG´
%HWZHHQ± $YHUDJHYDOXHUHVHWLQSXWVKRUW
circuitting the contact input (for
at 1.5 sec min.) resets O
2
average
and O
2
converted average simul-
taneously. Opening it restarts the
average value.
)RUGHWDLOVUHIHUWR³6HFWLRQ
Parameter setting, Average Value
5HVHWWLQJ´
%HWZHHQ± $XWRPDWLFFDOLEUDWLRQUHPRWHVWDUW
input
After shorting for 1.5 sec. or
more, automatic calibration is
started by the opening input
whether the automatic calibration
setting is ON/OFF.
)RUGHWDLOVUHIHUWR³6HFWLRQ
6HWWLQJRIDXWRFDOLEUDWLRQ´
%HWZHHQ± &KUDQJHLGHQWL¿FDWLRQFRQWDFW
output
%HWZHHQ± &KUDQJHLGHQWL¿FDWLRQFRQWDFW
output
%HWZHHQ± &KUDQJHLGHQWL¿FDWLRQFRQWDFW
output
%HWZHHQ± &KUDQJHLGHQWL¿FDWLRQFRQWDFW
output
%HWZHHQ± &KUDQJHLGHQWL¿FDWLRQFRQWDFW
output
$FWLRQRIUDQJHLGHQWL¿FDWLRQ
signal
5DQJHLGHQWL¿FDWLRQFRQWDFWLV
conductive at low range and open
at high range.
