Fuji Electric Monitouch S8 series, Руководство по подключению

Страница: 95 / 406

7-10 7. Fuji Electric
NW0LA-RS2, NW0LA-RS4 (Parameter Setting)
On the PLC loader, set parameters for general communications.
Be sure to match the settings to those made on the [Communication Setting] tab window of the editor.
Available Memory
The available memory setting range varies depending on the PLC model. Be sure to set within the range available for the
PLC. Use [TYPE] when assigning the indirect memory for macro programs.
*1 For the input/output memory, the variable name cooperation function of the PLC1 must be used. Indirect designation is not available with
the input/output memory.
Indirect Memory Designation
Specify the CPU number in the expansion code.
Item Setting Remarks
Mode Loader
Baud rate 4800 / 9600 / 19200 / 38400
Parity Odd / Even / None
Data bits 8
Stop bits 1 / 2
Variable name cooperation function
The variable name cooperation function can be used only for PLC1. For memory assignment, basically use the
variable name cooperation function.
We recommend you to define the area (variable) that is used for
communications with the S8 as “AT”.
Memory TYPE Remarks
%IX (input memory)
*1
- %IW as word device, %ID as double-word device
%QX (output memory)
*1
- %QW as word device, %QD as double-word device
%MX1. (standard memory) 02H %MW1. as word device, %MD1. as double-word device
%MX3. (retain memory) 04H %MW3. as word device, %%MD3. as double-word device
%MX10. (system memory) 08H %MW10. as word device, %MD10. as double-word device