Fuji Electric Monitouch S8 series, Руководство по подключению

Страница: 219 / 406

11-22 11. MITSUBISHI ELECTRIC
11.2.2 FR-V500
Communication Setting
Editor
Communication setting
(Underlined setting: default)
Inverter
*1 When the value in the range from 0.1 to 999.8 is set:
If the S8 series does not start communication within the preset time, the inverter stops due to an alarm. This can be avoided by the
periodical reading setting.
*2 When the inverter is turned on with the settings of Pr.79=0 and Pr.146=9999, the inverter enters in the PU operation mode.
Item Setting Remarks
Connection Mode 1 : 1 / 1 : n / Multi-link2
Signal Level RS-232C / RS-422/485
Baud Rate 4800 / 9600 / 19200 bps
Data Length 7 / 8 bits
Stop Bit 1 / 2 bits
Parity None / Odd / Even
Target Port No. 0 to 31
CR/LF None / CR / CRLF
Parameter
No.
Item Setting Setting Example
77 Parameter writing permission
0: Writing allowed when PU
operation stops
1: Writing prohibited
2: Writing allowed during
operation
2: Writing allowed during
operation
79
Operation mode selection
*2
0 / 1 / 2 / 3 / 4 / 6 / 7 / 8 1: PU operation
117
Communicating station
number
0 to 31 0
118 Baud rate 4800 / 9600 / 19200 bps 19200 bps
119 Data length / stop bit length
0: 8 bits / 1 bit
1: 8 bits / 2 bits
10: 7 bits / 1 bit
11: 7 bits / 2 bits
1: 8 bits / 2 bits
120 Parity check
0: None
1: Odd
2: Even
2: Even
121 Communication retrial times 0 to 10 / 9999
9999:
The inverter does not stop
even if a communication alarm
occurs.
122
Communication check
intervals
*1
0 / 0.1 to 999.8 / 9999
9999: Communication check
stop
123 Wait time 0 to 150 / 9999
9999: Can be set with the
communication data
124 CR/LF selection
0: CR/LF not provided
1: CR provided, LF not provided
2: CR/LF provided
1: CR provided, LF not
provided
146
Frequency setting
*2
0 / 1 / 9999 9999