Fuji Electric Monitouch S8 series, Руководство по подключению

Страница: 119 / 406

7-34 7. Fuji Electric
*1 When using a direct value, set [DEC (with sign)] for [Display Type] on the [Num. Display] dialog.
*2 Specify “1” for [Decimal Point] on the [Num. Display] dialog.
*3 Specify “2” for [Decimal Point] on the [Num. Display] dialog.
*4 Specify the multiplying factor in the range of
−
3 to 2.
*5 Specify the pulse constant in the range of
−
2 to 4 or F.
PLC_CTL
*1 Available only with F-MPC60B.
*2 Available only with FePSU.
*3 Select station No. 0 for a broadcast command.
*4 Can be set only for a broadcast command.
Note on Setting the Memory
Only the “List” file of “F-MPC04S” can be browsed by pressing the [Refer] button by default.
If any power monitor unit other than above is used, refer to each “List” file by pressing the [Refer] button and set the
memory.
Address denotations:
•
For the memory for which the circuit number is set (00 to 02, 12 to 18):
Circuit No. (1 to 12)
Setting item (00 to 99)
Memory
XXYYZZ
* For circuit No. E, specify “11” for the circuit number.
•
For the memory for which the circuit number is not set (03, 09 to 11):
Setting item (00 to 99)
Memory
XXYYYY
Content F0 F1 (=$u n) F2
kWh integrated value reset
1 - 2
(PLC1 - 2)
n Station number
2
n + 1 Command: 0
Max. kW (amount of power) reset
1 - 2
(PLC1 - 2)
n Station number
2
n + 1 Command: 1
Operation control
*1
1 - 2
(PLC1 - 2)
n Station number
3
n + 1 Command: 2
n + 2
0: Turning ON the input/output
1: Turning ON the output of Power OFF
2: Turning OFF the output of power
ON/OFF
Reset all of the demand maximum values
*2
1 - 2
(PLC1 - 2)
n Station number
2
n + 1 Command: 3
Alarm reset
*2
1 - 2
(PLC1 - 2)
n Station number
2
n + 1 Command: 4
Time setting
*2
1 - 2
(PLC1 - 2)
n
Station number
*3
9
n + 1 Command: 5
n + 2
0: Specific station number
1: Broadcast
n + 3 Year
n + 4 Month
n + 5 Day
n + 6 Hour
n + 7 Minute
n + 8
Second
*4