Fuji Electric Monitouch S8 series, Руководство по подключению

Страница: 7 / 406

[General Notes]
•
Never bundle control cables nor input/output cables with high-voltage and large-current carrying cables such as power supply cables.
Keep these cables at least 200 mm away from the high-voltage and large-current carrying cables. Otherwise, malfunction may occur
due to noise.
•
When using MONITOUCH in an environment where a source of high-frequency noise is present, it is recommended that the FG
shielded cable (communication cable) be grounded at its ends. However, the cable may be grounded only at one end if this is
necessary due to unstable communication conditions or for any other reason.
•
Plug connectors or sockets of MONITOUCH in the correct orientation. Failure to do so may lead to malfunction.
•
Do not use thinners for cleaning because they may discolor the MONITOUCH surface. Use alcohol or benzine commercially
available.
•
If a data receive error occurs when MONITOUCH and the counterpart (PLC, temperature controller, etc.) are started at the same
time, read the manual for the counterpart unit and remove the error correctly.
•
Avoid discharging static electricity on the mounting panel of MONITOUCH. Static charges can damage the unit and cause
malfunctions. Otherwise, malfunction may occur due to noise.
•
Avoid prolonged display of any fixed pattern. Due to the characteristics of the liquid crystal display, an afterimage may occur. If a
prolonged display of a fixed pattern is expected, use the auto OFF function of the backlight.
[General Notes]
Note that the following conditions may occur under normal circumstances.
•
The response time, brightness and colors of the S8 series may be affected by the ambient temperature.
•
Tiny spots (dark or luminescent) may appear on the display due to the liquid crystal characteristics.
•
There are variations in brightness and colors on each unit.
•
Cold cathode tubes are incorporated into the S808’s LCD display for backlights. Optical properties (brightness, irregular colors, etc.)
may change in a low-temperature environment or over time of operation.
•
Take safety precautions during such operations as setting change during running, forced output, start, and stop. Any misoperation
may cause unexpected machine motions, resulting in machine accident or damage.
•
In facilities where a failure of MONITOUCH could lead to accident threatening human life or other serious damage, be sure that the
facilities are equipped with adequate safeguards.
•
At the time of disposal, MONITOUCH must be treated as industrial waste.
•
Before touching MONITOUCH, discharge static electricity from your body by touching grounded metal. Excessive static electricity
may cause malfunction or trouble.
CAUTION