Fuji Electric Monitouch S8 series, Руководство по подключению

Страница: 105 / 406

7-20 7. Fuji Electric
7.2.3 PXG (MODBUS RTU)
Communication Setting
Editor
Communication setting
(Underlined setting: default)
Temperature Controller
The communication parameter can be set using keys attached to the front of the temperature controller.
Be sure to match the settings to those made on the [Communication Setting] tab window of the editor. (Underlined setting:
default)
* The communication function of the temperature controller can be selected at the time of purchase. Select a model on which RS-485
(Modbus) communication is available.
Available Memory
The available memory setting range varies depending on the device. Be sure to set within the range available with the device
to be used. Use [TYPE] when assigning the indirect memory for macro programs.
Item Setting Remarks
Connection Mode 1 : 1 / 1 : n / Multi-link2
Signal Level RS-422/485
Do not change the default settings of
the signal level, data length and stop
bit because these settings on the
temperature controller cannot be
changed.
Baud Rate 9600 / 19200 bps
Data Length 8 bits
Stop Bit 1 bit
Parity None / Even / Odd
Target Port No. 1 to 31
Channel Parameter Display Item Setting Example
Communication
(Ch9)
STno Station number 1 to 31 1
CoM Parity
96od (9600 bps / odd parity)
96Ev (9600 bps / even parity)
96no (9600 bps / without parity)
19od (19200 bps / odd parity)
19Ev (19200 bps / even parity)
19no (19200 bps / without parity)
96od
SCC
Communication
authority r (Read only)
rW (Read/write allowed)
rW
Memory TYPE Remarks
1 (input relay) 01H
4 (holding register) 02H
3 (input register) 03H