Fuji Electric Monitouch S8 series, Руководство по подключению

Страница: 386 / 406

Appendix 2 System Memory App2-3
*1 For PLC1, check the [ System memory ($s) V7 Compatible] check box in the [Detail] tab window of the [Device Connection Setting]
dialog. The same information is stored in the $P1 memory and $s.
*2 If executing device memory map control using $s762, $s763 and $s764, check the [ System memory ($s) V7 Compatible] check box in
the [Detail] tab window of the [Device Connection Setting] dialog for PLC2. Note that $P2: 493/494/495 cannot be used in this case.
: : :
←
S8
150 838 (PLC2) Error status Station No. 50 status (page App2-4)
: : :
160 848 (PLC2) Error status Station No. 60 status (page App2-4)
: : :
170 858 (PLC2) Error status Station No. 70 status (page App2-4)
: : :
180 868 (PLC2) Error status Station No. 80 status (page App2-4)
: : :
190 878 (PLC2) Error status Station No. 90 status (page App2-4)
: : :
199 887 (PLC2) Error status Station No. 99 status (page App2-4)
200 - Error status Station No. 100 status (page App2-4)
: : :
350 - Error status Station No. 250 status (page App2-4)
: : :
355 - Error status Station No. 255 status (page App2-4)
: : :
493
762 (PLC2)
*2
Device memory map reading prohibited flag (page App2-5)
0: Periodical reading/synchronized reading executed
Other than 0: Periodical reading/synchronized reading stopped
→
S8 494
763 (PLC2)
*2
Forced execution of the device memory map TRL_READ/TBL_WRITE macro
Setting for macro operation when there is a station with communication down
0: The macro is not executed in relation to any of the stations.
Other than 0: The macro is executed in relation to connected stations.
495
764 (PLC2)
*2
Device memory map writing prohibited flag (page App2-5)
0: Periodical writing/synchronized writing executed
Other than 0: Periodical writing/synchronized writing stopped
:
-
:
500 800 (PLC2)
Memory for Modbus slave communications
Used for reference table No. and free area 31 reference memory setting
$Pn500 to 505 are exclusively for monitoring: $s800 to 805 are used for writing from the
Modbus master.
Refer to the Modbus Slave Communication manual.
→
S8
501 801 (PLC2)
502 802 (PLC2)
503 803 (PLC2)
504 804 (PLC2)
505 805 (PLC2)
: : :
508 765 (PLC2)
Error response code (page App2-6)
If “800BH” (error code received) is stored for the error status ($Pn100 to 355), it is
possible to check he error code.
←
S8
509 766 (PLC2)
510 767 (PLC2)
511 768 (PLC2)
$Pn
(n = 1 to 2)
$s
*1
Contents Memory Type